Resetting the temperature cutoff switch – Dimplex SAHARA FIREPLACE 6903950000 User Manual
Page 12
9
C. HEATER THERMOSTAT CONTROL
To adjust the temperature to your individual
requirements, turn the thermostat control clockwise
all the way to turn on the heater. When the room
reaches the desired temperature, turn the
thermostat knob counter clockwise until you hear a
click. Leave in this position to maintain the room
temperature at this setting. For additional heat, turn
clockwise until you hear the click again and the
heater will turn on.
RESETTING THE
TEMPERATURE CUTOFF
SWITCH
Should the heater overheat, an automatic cut out will
turn the heater off and it will not come back on
without being reset. It can be reset by switching the
MAIN ON/OFF SWITCH to OFF and waiting 5
minutes before switching the unit back on.
CAUTION
If you need to continuously reset the heater, unplug
the unit and call Dimplex customer service at 1-888-
DIMPLEX (1-888-346-7539).