Vhf 220 mhz uhf – RF Neulink NL5000-T User Manual
Page 7

7
VHF 220 MHz
UHF
2.2
TRANSMITTER
Operating Bandwidth
26 MHz
28 MHz
20 MHz
RF Output Power (internally adjustable)
3 watt version
N/A
N/A
1 to 3 watts
6 watt version
1 to 6 watts
1 to 6 watts
1 to 6 watts
10 watt version
N/A
N/A
1 to 10 watts
Duty Cycle
5 to 100 % depending upon voltage and power level
RF Load Impedance
50 ohms
Modulation Distortion (per TIA/EIA 603)
5 % max.
Frequency Response (+1/-3 dB ref 1 kHz)
At MIC IN (ref pre-emphasis curve)
50 Hz to 2500 Hz
At AUX IN w/o pre-emphasis
50 Hz to 2700 Hz
Transmitter Attack Time:
15 ms max
Spurious and Harmonics
-20 dBm max.
FM Hum and Noise (per TIA/EIA 603)
12.5 kHz channel operation
40 dB min.
25 kHz channel operation
45 dB min.
Group Delay Variation (50-2500 Hz)
5 us max.
Current Drain
1 watt
1.0 A max.
1.0 A max.
1.0 A max.
3 watts
1.6 A max.
1.6 A max.
1.6 A max.
6 watts
2.4 A max.
2.4 A max.
2.4 A max.
10 watts @ 13.5 V
N/A
N/A
2.4 A max.
AUX IN adjustment range (60% rated dev.)
w pre-emphasis (@ 1 kHz)
200 to 1000 mV rms
flat
40 to 300 mV rms