RF Neulink NL5000-T - Manual (Page 17)

17
6 PROGRAMMING
To program the NL5000-T Module, the RF Neulink PC Programming Kit, NL5000-PCKT, must
be used.
6.1 PC PROGRAMMING KIT
The user should install the programming software on the host computer. The NL5000-T adapter
cables connect the radio to a computer’s serial communications port. Once the cables are hooked
up, the user runs the programmer software. This program transfers data between radio and
computer memory.
6.1.1
PROGRAMMING KIT CONTENTS AND REQUIREMENTS
The NL5000-T Programming Kit includes the following:
1. Programming software that is contained on two diskettes.
2. PC to radio adapter cable, which is terminated at one end with a DB-25F connector and at the
other end with a modular plug. The DB-25 connector plugs into the computer’s serial port,
the modular plug into an adapter.
3. The adapter for use with the NL5000-T Plus series of radios. This adapter mates the modular
plug to a DB-15M plug for connection to the radio. The adapter also includes wires for
powering the unit. The red wire is for positive voltage, the black for negative. Insure that the
correct voltage is applied to the unit.
The Programmer Kit requires a PC compatible computer with Windows 95 or later operating
system installed. The computer must have an RS-232 serial port available. A hard disk drive is
also required.
6.2 LOADING THE PROGRAMMER SOFTWARE
Insert disk one of the two disk set in the floppy disk drive. View the contents of the floppy disk
and double click on the install.exe file. Follow the instructions as they appear on the screen
including the prompt to insert the second disk. At the conclusion of the installation procedure, the
programming software will be resident on the user’s host computer.
6.3 COMPUTER SOFTWARE COPYRIGHTS
The RF NEULINK, Inc. products described in this manual include copyrighted RF NEULINK,
Inc. computer programs. Laws in the United States and other countries grant to RF NEULINK,
Inc. certain exclusive rights in its copyrighted computer programs, including the exclusive right to
distribute copies of the programs, make reproductions of the programs, and prepare derivative
works based on the programs. Accordingly, any computer programs contained in RF NEULINK,
Inc. products may not be copied or reproduced in any manner without the express written
permission of RF NEULINK, Inc. The purchase of RF NEULINK, Inc. products does not grant
any license or rights under the copyrights or other intellectual property of RF NEULINK, Inc.
except for the non-exclusive, royalty fee license to use that arises in the sale of a product, or as
addressed in a written agreement between RF NEULINK, Inc. and the purchaser of RF
NEULINK, Inc. products.