Rena TB-390 - Manual (Page 10)

TB-390 Operations Rev. 7/30/2014 9
OPTIONAL ACCESSORIES
Back-stop
(Part #: 57E-601-16)
Important: The optional back-stop can not be
used when the optional dryer is installed.
1. If the drop catch tray is installed it must
be removed before you can attach the
back-stop.
2. Attach the back-stop to the conveyor,
using the two screws provided.
Dryer
(Part #: DRYER IR7C or DRYER IR7C 220V)
&
Dryer Mounting Kit
(Part #: DKE-700)
An optional 700 watt dryer is available for use on the TB-390.
To help prevent damage to the conveyor and conveyor belts; the dryer should not be
powered on if the conveyor belts are not moving. See the “Safety Precautions” section.
Please see the next section for “Dryer Mounting Kit Instructions”.