Rena EasyFeed Lite - Manual (Page 5)

ASSEMBLY AND INSTALLATION
2
Assembly and Installation
The Easy Feed Lite Feeder is designed to feed material from single sheets up to 1/4" in
thickness. The size of the material can vary from 3.5" long by 5" wide up to 12" long by 17"
wide. It is ideal for feeding into conveyor transport systems, folding and stitching machines,
packaging and inkjet applications. Speeds of up to 25,000 pieces per hour (depending on the size
and material) are possible.
Choose a Location
Place the Feeder on a sturdy worktable or cabinet at least 12 inches from any walls. Allow
enough room to place the Feeder on the same work surface. Protect the Feeder from
excessive heat, dust, and moisture – avoid placing it in direct sunlight.
Assembly
After unpacking the Feeder:
1. Install the Adjustable Media Guide [A] and
Fixed Media Guide [B] using the four screws
supplied (two on each side).