Rena EasyFeed Lite - Manual (Page 10)

MAINTENANCE
7
Maintenance
This section describes maintenance that an experienced operator can perform. If any service or
maintenance is required beyond that which is described in this document, please contact your
local dealer.
Cleaning
WARNING
THE FEEDER IS A PRECISION MACHINE THAT SHOULD BE CLEANED
REGULARLY TO INSURE MANY YEARS OF SERVICE. BEFORE
PERFORMING ANY MAINTENANCE, DISCONNECT THE FEEDER FROM
THE POWER SOURCE!
The Feeder must be cleaned regularly of accumulated paper dust and ink. Depending on the
types of media that are run, paper dust may accumulate within machine and on the transport. To
clean, unplug the Feeder from the power receptacle and remove the covers.
• Internal Areas: Clean with a vacuum that has a soft brush attachment to help loosen the
dust particles. Take care not to damage the PC Boards or electrical wiring.
• Exterior: Clean with any standard non-abrasive household cleaner that does not contain
plastic-harming solvents.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO THE
FEEDER. EXCESS LIQUID COULD HARM ELECTRONIC PARTS. ALWAYS
DAMPEN A RAG WITH THE CLEANER AND APPLY IT TO THE PARTS TO
BE CLEANED.
Rollers and Transport Belts
The Belts and Rollers can become glazed with paper lint and ink from the media. They should be
regularly cleaned with a mild abrasive household cleaner on a damp cloth.
Avoid using solvents on the Rubber Rollers.