Dixon 966004101 - Manual (Page 6)

7
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton.
Check carton contents against list. Be sure all
•
parts are there.
TOOLS REQUIRED
• ½" Wrench (2) •
9 /
16
" Wrench (2)
•
7 /
16
" Wrench (2) • Ft/Lbs Torque Wrench
• Drill • ¼" and 5 /
16
" Drill Bits
•
9 /
16
" Socket and Ratchet
•
Standard Screwdriver
PARTS IDENTIFICATION
CONTAINER CONTENTS
2 - Soft bag containers 1 - Bag of Hardware
1 - Upper Chute
1 - Lower Chute
1 - Cover Assembly 1 - Mounting Hardware
COVER ASSEMBLY
BAG CONTAINERS
LOWER CHUTE
NOTE: When right hand (RH) and left hand (LH. are mentioned in this manual, it means when you are
seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in “NEUTRAL” position.
• Turn ignition key “OFF” and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact
with plug.
UPPER CHUTE