REMKO Smart Count Activation - Manual (Page 8)

3 Checking the
Smart Count
The additional options can be checked as follows:
Switch to the /User/Information/Basic information
menu. Check the status of the activation. As of ver-
sion BMU-SP 4.15, the 'Heat metering" status
information is visible here.
1
Status
Party mode
Anti-freeze protection
Webserver
Heat meter Off
Off
Off
Standby
Back
Fig. 5: Heat meter deactivated
After activating the Smart Count heat meter, the
associated item in this level is marked with "on".
Fig. 6: Heat meter activated
With the activation, you will now find the item
"meter readings" in the user level under "Informa-
tion".
User
Information
OK Back
Fig. 7: User level information
Fig. 8: Meter readings
Here you will find the meter readings for:
1. Solar yield
2. Heat pump
3. Heating and hot water
4. PV energy
5. CO 2 savings
REMKO Smart Count
8