REMKO Safety assembly - Manual (Page 7)

2 Technical data
2.1 Technical data for the safety valve
Diaphragm safety valve
Body DIN EN 12165 CW 617N
Handle ABS
Seal EPDM
Nominal pressure PN10
Perm. max. operating temperature °C 120
Operating liquid Glycol-water mix, max 50%
Categorisation per pressurised equipment directive PED IV
Inlet connection / outlet connection Inches 1/2" x 3/4"
Trigger pressure bar 2.5 - 3.0
EDP no. 11200010
2.2 Dimensions of the safety assembly
2
1
2
Fig. 1: Dimensions of the safety assembly
1: Internal thread 1"
2: Polystyrene shell as insulation (per DIN 4102-A1)
7