REMKO PGM 100 - Manual (Page 15)

15
Series PGT 30 PGT 60 PGT 100
Nominal heat output kW 26 55 100
Heating capacity kW 10 – 26 25 – 55 50 – 100
Air output m³/h 800 1.450 3600
Fuel/type of gas l i q u i f i e d g a s C a t. I
3 B / P
Unit connecting gas-pressure bar 1,5 1,5 1,5
Unit connecting value kg/h 0,78 – 2,0 1,95 – 4,27 3,9 – 7,8
Electrical connection 1~ V 230 230 230
Frequency Hz 50 50 50
Power consumption kW 0,07 0,11 0,125
Fuse-protection (required) A 10 10 10
Kind of protection IP 44 IP 44 IP 44
Sound pressure level L
pA 1m
1)
dB(A) 56 – 69 62 – 72 74 – 82
Weight (without accessories) kg 12 20 47
Dimensions Length mm 450 650 1060
Width mm 260 320 435
Hight mm 410 510 620
1) Noise measuring DIN 45635 - 01- KL 3
Technical Data
Automatic burner relay: Working voltage 230 V (-15% + 10%)
Frequency 50 Hz (40 - 60 Hz)
Safety time 5 seconds
Waiting time after interference cut-off ca. 60 seconds
Allowable ambient temperature – 20° C ... + 60° C
Min. required ionisation current 5 µA
Sensitivity (ionisation current) 1 µA
Kind of protection IP 44
Any operation/handling which does not correspond to that indicated in these instructions is prohibited,
otherwise we will not be responsible and the guarantee will become void.
The orderer or the customer must have properly filled out the “guarantee certificate” which is enclosed
with every REMKO automatic heater and must have returned it to REMKO GMBH & Co. KG within
a timely acceptable period based on the sale and commissioning, to be entitled to possible
guarantee claims regarding faulty material.
Technical Data: