REMKO PG 12E - Manual (Page 9)

9
1~
L1
1 2 3 4
1 2 3 4
KL MV2
M
BS
Z
PZ
TE
MV1 TB
N PE
Wiring Diagram
Technical Data
KL = terminal strip M = fan motor TE = thermocouple
BS = operating switch Z = ignition electrode MV1 = gas valve (thermoelectric)
MV2 = gas valve (electromagnetic) PZ = piezo electric igniter TB = temperature limiter
Series PGM 12/12 E
Nominal heat output kW 12
Heating capacity kW 12
Air output m³/h 250
Fuel/type of gas liquid gas Cat. I
3B/P
Gas pressure mbar 300
Gas consumption kg/h 0,95
Electrical connection V 230
Frequency Hz 50
Power consumption max. W 60
Fuse protection A 10
Kind of protection IP 44
Sound pressure level L
pA
1m 1) dB(A) 57
Weight kg 6,8
Dimensions total length mm 400
width mm 185
height mm 320
1) noise measuring DIN 45635-01-Kl3 in heating operation
Correct usage
The units are to be used only for heating and ventilation
purpose in industrial or commercial application because
of their construction and equipment.
If specification of the manufacturer or legal regulations,
are not followed or if unauthorised changes are made
on the unit, the manufacturer is not liable for resulting
damages.
An operation/use other than that indicated in these
instructions is prohibited!
In the case of non-observation we will not be held
responsible and our guarantee will become void.
Service and Guarantee
Any claims under guarantee regarding materials can be
accepted only when the orderer or his customer has
filled in completely the “guarantee certificate” which is
enclosed with every REMKO-heater and has returned it
to REMKO GmbH & Co. KG in due time after the unit’s
sale and commissioning.
The units are factory tested on faultless function. If any
failure occurs though which cannot be eliminated by the
operating person, please contact your dealer or contact
person.