REMKO ATR-4 User Manual
Page 11
11
Mounting
The clock thermostat is suitable for mounting on many European lower wall
sockets as well as for conventional wall-mounting with wall cable slot.
When mounting on the wall, make sure that only the part intended for the
cable slot is separated from the bottom of the housing.
If the entire panel is removed, it is possible that the housing no longer com-
pletely closes.
MO DI MI DO FR SA SO
MO DI MI DO FR SA SO
G
Note: The electronic clock thermostat must be mounted on the wall in
such a way that it can measure the average room temperature.
Drafts and proximity to windows and doors or sources of heat,
etc. are to be avoided.
G
Note: The electronic clock thermostat should be attached to inner walls
approx. 1.5 m above the floor.
- PWL H (24 pages)
- CLK 150 (20 pages)
- ELT 2-1 (12 pages)
- CLK 170-RV (24 pages)
- DZH 90-2 (20 pages)
- ELT 9 (12 pages)
- ELT 18 S V.2 (12 pages)
- ELT 9-6 (12 pages)
- EST (8 pages)
- PGM 60 (16 pages)
- PGM 12 (12 pages)
- HTL 400 (20 pages)
- PGT 100 (20 pages)
- ATR-3 (16 pages)
- SLV11-88-2 (16 pages)
- PWW Series (36 pages)
- GTF-5 (8 pages)
- VRS Series (36 pages)
- GSG-4 (8 pages)
- GPM 75 (44 pages)
- ATR-2 (8 pages)
- ASF 100 (16 pages)
- ETF 460 (20 pages)
- ETF 320 (20 pages)
- ETF 550 (20 pages)
- WKL 30 INOX (24 pages)
- SLN 80 (20 pages)
- RBW 300 PV-S (48 pages)
- HTS 260 CAMURA (76 pages)
- WKF 180 Duo S-line (64 pages)
- WKF-compact S-Line (96 pages)
- AMT 15 (16 pages)
- AMT 25 (16 pages)
- ETF 220 (16 pages)
- TX 3000 (8 pages)
- PG 50 (16 pages)
- TX 9000 (8 pages)
- CLK 20 (20 pages)
- AT 25 (16 pages)
- DZ 18 HD (16 pages)
- HTK 160 (20 pages)
- PG 12E (16 pages)
- PWL (24 pages)
- PWW 5000 (12 pages)