REMKO RVS xxx H - Manual (Page 21)

Installation
NOTE
Installation may only be
undertaken by authorised
personnel.
Unit installation
1. Install the vibration absorbers
(accessories) under the system
(Figure 6
).
2. Attach the unit to the building
where structurally permitted.
3. Ensure that structure-borne
noise is not transferred to other
parts of the building.
4. Connect the medium lines.
Separating the
Transport pallet
The system is supplied with a pallet
for the purpose of transportation.
Remove this before installation.
Transport packaging
Transport pallet
Unit layout
RVS
60H RVS
75H RVS
100H
RVS
150H
Holediameter 14 mm
Load point A 16,5 17,5 18,5 21,5
Load point B 28,5 32,5 46,5 46,5
Load point C 11,5 13,5 31,5 33,5
Load point D 38,5 39,5 45,5 52,5
6 Weight loads
All values in kg
RVS 60H to RVS 150H
A
C
B
D
21