RADO International_Guarantee - Manual (Page 4)

Crown positions
0 = normal position (crown pushed
completely in)
1 = quick correction of date display
2 = correction of time display
Instructions for quartz
watches
Setting the time
For correction of hours, minutes
and seconds, pull the crown out to
position 2. Set the correct time by
turning the crown forwards or
backwards.
If the watch has a second hand,
this hand remains still in crown
position 2. The seconds can be
synchronized with the official time
signal by pushing the crown back
to position 0.
For watches with date display
Pull the crown out to position 1
and turn it to the desired date.
See that the time is correctly set
and that 12 o’clock midday is not
confused with 12 o’clock mid-
night.
Instructions for use
0 1 2