RADO Chronograph_TheOriginal - Manual (Page 3)

2nd Start:
Press button A again.
2nd Stop:
Press button A. The total of the
first and second time measure-
ments can be read.
and so on . . .
Reset to zero:
After the chronograph has been
stopped, press button B. All chro-
nograph hands are reset to zero.
Intermediate time function
Start:
Press button A.
1st intermediate time:
Press button B. The chronograph
hands stop moving and the first
intermediate time can be read.
Press button B again to resume the
running time display.
For further intermediate time mea-
surements, proceed as for the first
intermediate time.
Stop:
Press button A and read the total
time.
Reset to zero:
After the chronograph has been
stopped, press button B. All chro-
nograph hands are reset to zero.
Setting the chronograph hands
After a batterie change, it is pos-
sible that the chronograph hands
have to be set to zero as follows:
Hours:
Pull out the crown to position 1
and press button A.
Minutes:
Pull out the crown to position 1
and press button B.
Seconds:
Pull out the crown to position 2
and press button A.