QVidium StreamViewer - Manual (Page 7)

User’s Manual QVidium™ StreamViewer
3
Streaming Video Recorder
A primary function of the StreamViewer is to receive and record a Video over IP stream.
Using QVidium’s advanced error correction, the StreamViewer tries to reconstruct the
original video signal as perfectly as possible. Error correction recovers lost packets and an
internal jitter buffer re-orders packets to their correct sequence and smooths out any timing
gaps to create a fluid, smooth-flowing and error-free video stream. The StreamViewer can
then store that recovered video stream onto a
hard disk drive for later play back.
To configure and enable video recording, click
on Capture under the File menu to bring up the
Stream Capture panel as shown on the left. You
can browse for and set the folder where the
recorded video will be stored, and set the
filename for the stored video clip. For
convenience, StreamViewer includes an option
to tag the video file with a video clip sequence
number and to insert a time stamp into the video
clip file name.
Clicking on the Start button starts the capture
and Stop stops the capture. The Save button
saves the configuration settings, and Cancel
simply closes the Capture panel without saving
your configuration setting changes.
A Status field displays the duration of the
recorded video clip in seconds and the size of
the captured file.
Page 6 © 2007 QVidium™ Technologies, Inc.