beautypg.com

Introduction, Overview, Network setup – QVidium QVSD User Manual

Page 4: 1 overview, 2 network setup

background image

User‟s Manual v.3

QVidium

®

QVSD H.264 SD Video

Codec™

Copyright 2011 QVidium

®

Technologies, Inc.Page 4 of 53

1

Introduction


Congratulations on purchasing the QVidium

®

QVSD H.264 SD Video Codec

™.

QVidium

®

QVSD H.264 SD Video Codec

™ – Front View


1.1 Overview

The QVidium QVSD H.264 SD Video

Codec™ can encode, decode, or transcode standard or high

definition video using either MPEG2 (main profile) or MPEG4-AVC (Part 10, H.264 High Profile,
Level 4.1) compression, and to interface a video feed from a wide range of video standards and
connections for transport over nearly any IP network. The H.264 SD Video

Codec™ includes

QVidium‟s patented, advanced ARQ Error Correction and clock synchronization. With these
advanced Quality of Service (QoS) features, the H.264 SD Video

Codec™ can send video over

nearly any network and across the world, including wireless connections and the public Internet,
with unsurpassed video transport quality and state-of-the-art video compression for minimizing
bandwidth.

1.2 Network Setup

The H.264 SD Video

Codec™ comes with a factory preset IP address of 192.168.1.23 and

Netmask of 255.255.255.0. You can download and run our CodecManager application to
determine or change the IP settings, even when the IP address has been reset to an unknown
address. Please refer to Section 8 of this manual for configuration using the CodecManager
application.

The H.264 SD Video

Codec™ can also be reconfigured through a web browser when you know

the IP address. Follow the steps below to reconfigure the network settings through a web browser
on a computer connected to the same subnet as the Codec.

1) Point your web browser to

http://192.168.1.23

NOTE: The H.264 SD Video

Codec™ requires user authentication to enter the web browser or to

log in using Telnet. The factory preset username

is “root” and the password is also “root.”

Please enter these settings when prompted to access the system.

This manual is related to the following products: