QVidium QVAM140-ARQ User Manual

Page 6

Text mode
Original mode

User’s Manual v.2

QVidium

QVARQ A140

Technologies, Inc.

3. On the Proxy/Profile Network configuration page, enter the source UDP Port to match the

UDP port of the incoming IP media stream. The Jitter field is defaulted to 50 ms and can be
let at this setting..

4. Enter the Source ARQ port to match the UDP port set on the transmitting side (QVidium

Encoder or TX Proxy Server) for the ARQ packets of the incoming IP media stream. If
connecting to a TX Proxy Server or if the encoder is sending to multiple destinations, then you
will need to use a different UDP port number for the ARQ stream from the incoming UDP
media stream.

Figure 3: Rx Proxy Network Configuration.