Directed Electronics PDG-2515/2520 User Manual

Page 22

Text mode
Original mode

PDG-2515/2520 Operating Manual

Page 15

MNPDG2515-2520R0.doc

Be aware that coming out of this mode, if any variables are out of range by
going into a mode that conflicts with these settings, the channel/channels
will be set back to the default values.

Figure 6 Example 1: Divide by N Mode

Figure 7 Example 2: Divide by N Mode

Burst Mode

In Burst Mode, a set number of pulses (the burst packet) are output from
OUT1. Each burst packet is sent at the packet frequency. The burst
packet will start ONE period of the burst packet frequency after the rising
edge of the packet frequency (OUT 2 will ALWAYS output the packet