Q3 Innovations AlcoHAWK Beacon - Manual (Page 11)

9
Step 3) Press the Left Button to choose your desired level:
Value Meaning
2 Set alert level to 0.02
3 Set alert level to 0.03
5 Set alert level to 0.05
8 Set alert level to 0.08
Note: These levels are assuming that your display format is set to %BAC.
Step 4) Press the Power Button to confirm your setting and then press
the Right Button to return to the “USr” screen.
SET BEEP WHEN BLOWING
Follow these steps to enable or disable the beep when blowing. The
default setting is no beep when blowing.
Step 1) From the main screen (temperature display) press the Right
Button for two (2) seconds until “USr” is displayed on-screen.
Step 2) Press the Power Button four (4) times.
Step 3) Press the Left Button to choose your desired setting:
Value Meaning
0 No beep when blowing
1 Beep when blowing
Step 4) Press the Power Button to confirm your setting and then press
the Right Button to return to the “USr” screen.