Q3 Innovations AlcoHAWK Beacon - Manual (Page 10)

8
Value Meaning
F Fahrenheit °F
C Celsius °C
Step 4) Press the Power Button to confirm your setting and then press
the Right Button to return to the “USr” screen.
SET BAC RESULT DISPLAY FORMAT
Follow these steps to set the BAC result display format to %BAC,
‰BAC, or mg/l. The default setting is %BAC.
Step 1) From the main screen (temperature display) press the Right
Button for two (2) seconds until “USr” is displayed on-screen.
Step 2) Press the Power Button two (2) times.
Step 3) Press the Left Button to choose your desired format:
Value Meaning
0 ‰BAC
1 mg/l
2 %BAC
Step 4) Press the Power Button to confirm your setting and then press
the Right Button to return to the “USr” screen.
SET BAC ALERT LEVEL
Follow these steps to set the BAC alert level to 0.02, 0.03, 0.05, or 0.08
(assuming the display format is set to %BAC). The default setting is
0.05.
Step 1) From the main screen (temperature display) press the Right
Button for two (2) seconds until “USr” is displayed on-screen.
Step 2) Press the Power Button three (3) times.