Demco 9518171 - Manual (Page 3)

2. Unplug lights pull grill straight out and set aside.
3. Release four plastic fasteners from vehicle and put
back in grill for later installation.
4. Remove four bolts from top of bumper.
5. Remove two bolts from each side (unplug fog lights
if equipped) and set bumper aside.
6. Remove tow hooks (if equipped) by removing two
bolts on each side, bolts and tow hooks will not
be reused (holes may need to be drilled for some
models).
7. Notch plastic shield according to picture.