beautypg.com

Dacor, Dishwasher problem solving, Problem solution guide – Dacor ED24 User Manual

Page 22

background image

22

Dacor

®

Dishwasher

Problem Solving

Problem Solving

Unnecessary service calls may be expensive, frustrating, and time-consuming.
Before you call for service, please review the

Problem Solution Guide

below.

Problem Solution Guide

Problem:

May be caused by:

What to do:

Use maximum recommended amount of dishwasher

detergent.
You may need a home water softener.
To remove hard water spots, try a vinegar rinse:

• Wash and rinse load as usual.
• Remove all metal items from dishwasher. Do not

add detergent.

• Pour 2 cups of vinegar into a bowl and set it on

bottom rack.

• Run dishes through an entire wash program. If

the vinegar rinse does not work, repeat process

substituting ¼ cup of citric acid crystals (available
at most drug stores) for the vinegar.

Hard water

Wiping metal items with a damp cloth should

remove spots. For sterling and silver plated
flatware, rub with a towel or use a good cream

silver polish.

Garbage disposal or sink trap full

Run garbage disposal to eliminate food and
obstructions in sink. Make sure sink drains properly.

No rinse aid

Make sure rinse aid dispenser is full.

Water not hot enough

Check hot water supply temperature. Minimum

recommended incoming temperature to the

dishwasher is 120ºF.

Too little water

Make sure water valve is fully open. Make sure that

water pressure is between 20 and 120psi and flow

rate is a minimum of 1.0 gpm.

Incorrect use of dishwasher detergent

Use only correct amount of dishwasher detergent

according to water hardness (see page 14) and the

wash program selected. Fill dispenser only when

ready to start the dishwasher. Do not use old or
caked detergent. Store dishwasher detergent in dry

place and in a closed container. Change the

dishwasher detergent if results are still poor.

Spotting and filming

Items not loaded properly

Make sure dishwasher is loaded according to

instructions starting on page 10. Do not overload.

Make sure spray can reach all soiled surfaces.

This manual is related to the following products: