Dacor ED24 - Manual (Page 17)

Operating Your Dishwasher
17 Use and Care Manual
Stopping Your Dishwasher During Operation
CANCEL
To stop the current cycle and drain your dishwasher:
1. Open the door. The dishwasher will stop operating.
2. Press CANCEL.
3. Close the door. After a short pause, you will hear the
water in the dishwasher begin to drain. Once the water is drained, the
dishwasher will stop.
IMPORTANT: If you press the CANCEL button twice, the dishwasher will
stop completely. The water inside the dishwasher will not drain.
Pausing Dishwasher Operation
STOP
To temporarily pause dishwasher operation:
1. Open the door. The dishwasher will stop operating.
2. Press the START/STOP button.
3. The door may be closed and the dishwasher will not
start.
To resume the dishwasher cycle:
1. Open the door.
2. Press the START/STOP button.
3. After a brief pause, the dishwasher will resume the
previous cycle.
Sanitizing the Dishes
SANI-RINSE
If you want a high temperature rinse after the wash cycle for
maximum sanitization:
1. Press the NORMAL button to select the normal wash
cycle.
2. Press SANI-RINSE. (Pressing SANI-RINSE a second
time will turn sani-rinse off again.)
3. Press START/STOP.
4. Close the door. After a short pause, the dishwasher will
start.
IMPORTANT: SANI-RINSE can only be selected when the NORMAL
wash cycle is selected.
SANI
RINSE
CANCEL
NORMAL
START
STOP
START
STOP
START
STOP