PSE Archery Compound Bow Set-up Procedures - Manual (Page 3)

10. For all styles of arrow rests set the center shot adjustment on the rest so that the arrow is parallel to the
alignment mark.
11. Using the nocking loop and the rest adjustment, set the arrow horizontal so that it is parallel to the
alignment mark on the window of the bow and passes in front of the arrow rest mounting hole.
12. If using a fall-away arrow rest with an arrow holder, clean the mounting area on the riser with alcohol. Then
attach the arrow holder to the riser using cyanoacrylate glue, such as Carbon Force Advance Instant
Adhesive, so that the arrow rests in the holder when the bow is at rest.
Alignment mark
Arrow rest
mounting hole
Arrow Holder
Alignment Mark