PSE Archery Pro Series Bows 2012 - Manual (Page 2)

pSE EVO™ hYBRID CAM
AVAIlABlE ON: DREAM SEASON® EVO™, EVO™ 7, AND FREAk™
• Next generation design based on the highly regarded Axe cam
• 2nd generation posi-lock inner cam
• 6” of draw length adjustment in ½” increments
• Smooth rollover with generous valley and solid wall
• Cam profiles engineered to minimize limb and string vibrations
• Nock travel optimized for tunability at all draw lengths
• Laser engraved markings for inner cam, stop and tune settings
• Sealed ball bearings
• Cushioned stops
pSE DRIVE™ hYBRID CAM
AVAIlABlE ON: VENDETTA™ AND REVENGE™
• Hybrid cam performance with the simplicity in adjustment and timing of a
single cam
• 2nd generation posi-lock inner cam
• 6 ½” of draw length adjustment in ½” increments
• Gentle rollover with generous valley and solid wall
• Cam profiles engineered to minimize limb and string vibrations
• Nock travel optimized for tunability
• Laser engraved markings for inner cam, stop and tune settings
• Sealed ball bearings
• Cushioned stop
pSE MINI EVO™ hYBRID CAM
AVAIlABlE ON: EVO™ SD, STIlETTO™,
DOMINATOR™ pRO, AND SUpRA™ ME
• A smaller version of the EVO cam for shorter power stroke
• 2nd generation posi-lock inner cam
• 5 ½” of draw length adjustment in 1/2” increments
• Smooth rollover with generous valley and solid wall
• Cam profiles engineered to minimize limb and string vibrations
• Nock travel optimized for tunability at all draw lengths
• Laser engraved markings for inner cam, stop and tune settings
• Sealed ball bearings
• Cushioned stop
2012 pse product
cams
®
pse cam adjustments
ALL inner cAmS:
The inner cam system allows draw length adjustments over a prescribed range, in most cases,
without putting the bow in a bowpress. There are two types of inner cam systems: discrete setting inner
cams and posi-lock inner cams.
Discrete setting inner cams have the adjustment screws going through a specific hole in the inner cam and
threading into the cam. The screws need to be completely removed to make adjustments. The “A” setting
is the longest draw length for that bow and draw lengths get shorter as you progress down the alphabet
(A to B, B to c, etc.)
Posi-lock adjustable inner cams are adjustable in ½” draw length increments. The “A” setting is
the longest setting for the cam. Draw lengths get shorter as you progress down the alphabet
(“A” to “B”, “B” to “c”, etc.) by roughly ½” per letter.
cAm OrienTATiOn:
On cams with orientation marks, a reference mark is found to indicate an approximate orientation.
This line is for reference only and is meant to give approximate orientation only and may vary between
bow models. The orientation of the cams may be changed slightly by twisting or untwisting the string or
cable. if attaching the string to the “+” or the “-” post, the orientation marks will not be aligned with
the cable.
DrAw LengTh:
STring POST ADJUSTmenTS
Some PSe cams have string post adjustments for
draw length. For minor changes in draw length,
the bow must be placed in a suitable bow press
and tension relieved from the string and cable.
The string side of the cam may have additional
posts. moving the string from the post with the dot
to the post with the “+” will increase draw by
approximately ¼”. moving the string from the
post with the dot to the post with the “-” will
decrease draw by approximately ¼”. Draw
weight, as well as draw length and rock point
position, will change with string post adjustments.
A Position
pSE UF hYBRID™ CAM
AVAIlABlE ON: OMEN™ pRO
• Discreet cam profiles at all draw lengths for uncompromised performance
• 5" of draw length options in ½” increments
• Adjustable wall and valley to meet individual shooting style
• Cam profiles engineered to minimize limb and string vibrations
• Nock travel optimized for tunability at all draw lengths
• High strength aluminum - 83% stronger than standard cam material
• Laser engraved tuning reference marks
• Sealed ball bearings
• Cushioned stops
2012 pse pro serIes cams