Proel X30TB - Manual (Page 7)

7
FIG. 5
100 / 70 V line
AUP240L
The TOTAL POWER of all the speakers must be less or equal
to the power of the amplifier.
La SOMMA delle potenze degli altoparlanti deve essere
inferiore o uguale alla potenza dell’amplificatore.
CONSTANT VOLTAGE LINE
LOW IMPEDANCE SYSTEM
+
+
- + - + - + -
-
+ - + -
+ - + - L
L
R
R
ACDT90V
(for other AVL equipment see AVL system
catalogue at proelgroup.com)
(for other AVL equipment see AVL system
catalogue at proelgroup.com)
Speakers and amplifier power capability must be
approximately the same for the specified impedance.
Altoparlanti e amplificatore devono avere approssimativamente
la stessa potenzaper l’impedenza specificata.
Model X30T X50T X80T X80A
Speakers
HF
LF 3" woofer 5" woofer 8" woofer 8" woofer
Power
nominal 15W 30W 50W -
max 30W 60W 100W -
Nominal impedance 8 ohm 8 ohm 8 ohm -
Line input 70/100 V 70/100 V 70/100 V -
Connections
Integral connections included in the
bracket (wire terminals)
Integral connections included in the
bracket (wire terminals)
2 x binding post
COMBO connector (INPUT)
XLR-M connector (LINK)
Power amplifier - - - 80+20 W
Controls
70/100 V voltage tap selector
8ohm - 8/15/30W power tap selector
70/100 V voltage tap selector
8ohm - 12/25/50W power tap selector
70/100 V voltage tap selector
8ohm - 25/50/100W power tap selector
LEVEL, HI EQ, LO EQ
MIC/LINE selector, GND LIFT
Frequency response (-10 dB) 100-20k Hz 80-20k Hz 75-20k Hz 75-20k Hz
SPL (1W/1m, 1 kHz) 87 dB 90 dB 91 dB -
MAX SPL - - - 113 dB
Dimensions (mm) 12.5x19.3x12 17x28x17.5 25x42x25 25x42x25
Weight (kg) 1.3 2.3 4.6 6.2
XENIA - TECHNICAL SPECIFICATIONS - SPECIFICHE TECNICHE
1" soft dome horn loaded tweeter