Posiflex CD-3860 - Manual (Page 7)

7
Programming Procedure
Below is the programming procedure by using barcodes in this guide.
1. Power up the scanner.
2.
Scan the Start of Configuration barcode.
3. Scan the barcode for the desired feature. Multiple features can be
enabled/disabled before scanning the End of Configuration barcode.
4. Scan the End of Configuration barcode and save the new configuration.
5. To give up a configuration change, power off the scanner before scanning the
End of Configuration barcode or scan the Abort barcode.
6. For some parameter setting, such as barcode length and identifier code, it is
required to scan the Set barcode to save the configuration.
Default values are highlighted in gray background.
Scan the “Start of
Configuration” barcode
Scan the “End of
Configuration” barcode Scan the “Abort” barcode Power off the scanner
Finish the configuration
Scan barcode of the
desired feature
Power up the scanner
Discard the configuration