Posiflex CD-3860 - Manual (Page 10)

10
Start Of Configuration
3. General Scan Mode Setting
Handheld Operation
Barcode
Value
Barcode Label Description
SM01 Trigger Mode
The scanner becomes inactive as soon as the data
is transmitted. It must be triggered to become
active again.
SM02 Auto Scan Mode
The scanner is still active after the data is
transmitted but the successive transmission of
the same barcode is not allowed when the trigger
switch is pressed again.
SM04 Pulse Mode
The scanner will light up and blink when press the
scanner trigger switch once and the scanner will
turn off after next pressing.
SM05 Repeat Mode
This mode is similar to Auto Scan Mode, but
double reading for the same barcode is
prohibited if the scanner switch is pressed.
SM06 Momentary mode
The scanner will light up only when the trigger
switch is pressed the scanner will turn off when
the trigger switch is release.