Posiflex PD–73X1 - Manual (Page 9)

Part 9
20 CHINESE characters (addresses: B0A1, B1A2, B2A3,
……,
BEAF, BFB0, C0B1,
……, C3B4) one by one in bottom row.
d. The PD then shows and enters “Wrap Around Mode” and shows
ASCII code font from 21 to 7F (HEX) starting from Home position.
e. The PD enters and shows “Vertical Scroll Mode” and go to step a
and repeat the test
In Epson mode, the test sequence is as follows
a. Clear screen, Cursor home.
b. The PD enters and shows “VERTICAL SCROLL MODE”, the
power on message in applicable display format (2 rows or 4 rows),
language type, version and a message “OVERWRITE MODE”.
c. The PD then enters OVERWRITE MODE and displays 20
characters of “A” from home position. Then 20 characters of “B”
also from home position for 2 rows format or from beginning of 2
nd
row for 4 rows format.
d. Clear screen, Cursor home.
e. The PD shows and enters “HORIZONTAL SCROLL” mode, then
displays ASCII code font of current page from 21 to FF (HEX) in
2
nd
row.
f. Go to step a and repeat the test