Posiflex PD–73X1 - Manual (Page 3)

Part 3
• Support 2 Code Pages of 128 characters each
• Support Chinese character GB-2312 or BIG-5 Character (16 x 16
dot)
• Support 12 international character sets of 12 characters each
• 3 User defined characters for PD-7301 and 2 User defined
characters for PD-7311/7321)
• Simple installation
• Software self test
• Serial (RS232) data interface
• Default protocol 9600, n, 8, 1
• Power obtained through interface cable
• Case color choices: ivory, charcoal
MODEL NUMBERS
Model Number PD-7301 PD-7311 PD-7321
Character Format 8 x 16 or 6 x 8
16 x 16 or 8 x 16
or 6 x 8
16 x 16 or 8 x 16
or 6 x 8
Display
Characters
Alphanumerical
GB-Chinese or
Alphanumerical
BIG-5-Chinese or
Alphanumerical
Display Capacity 2 x 20 or 4 x 26
2 x 10 or 2 x 20
or 4 x 26
2 x 10 or 2 x 20
or 4 x 26
Command Set
Noritake or
Epson
IEE or Noritake
or Epson
IEE or Noritake or
Epson
User-defined
Characters
3 characters max. 2 characters max. 2 characters max.
DESCRIPTION
This LCD is a self-contained multiplexed unit which provides a simple
interface to a microprocessor system.
The display is available with one I/O connector for both the RS232
interfacing and the power supply.
This unit consists of a liquid crystal display cell and a minimal amount of
electronic hardware. All display characters and control codes can be accessed
in a 8-bit format. Primary complexity is contained within the microprocessor
software, which controls all display functions.
Data is entered serially at 9600 baud rate as default and can be changed to
19200 baud rate per jumper setting. The large characters are easily readable,
and provide comfortable short or long-term viewing.
APPLICATION
This unit may be used as a console display which provides alphanumeric