Posiflex CR-2210 Series - Manual (Page 3)

Part 3
a). For CR-2210: The standard signal cable is 21863018010 which has a 8
pin plug at one end to connect to the cash drawer and a 6 pin modular
plug at the other end to connect to the POS system/printer. This cable
serves for most popularly used POS equipment such as Posiflex POS
terminals, Posiflex POS printers, most Epson POS printers, most Star
POS printers and all other compatibles. The user may cut the 6 pin end
or order the ready cut cable CCBLA-180A and assemble this free end
according to his POS printer specification if the POS printer used
utilizes different connection. The cable connection on CCBLA-180A is
as below:
Wire color RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
b). For CR-2214: Serial signal RS232 DF9F RJ9 conversion cable
(21863259900/21863159900).
c). For CR-2215: USB cable (21863250800/21863150800)
6. Power Source depend on model
a). For CR-2210: not applicable
b). For CR-2214: Power adapter 12VAC 1.5A
c). For CR-2215: Power adapter 12VAC 1.5A
INSTALLATION
Coin compartment adjust:
Open the top cover and remove any protective materials such as a
piece of PE foam if it exists.
The coin compartment separator can be removed from and inserted
till click into the grooves in adjustable coin compartment zones for appropriate
compartment size.
Coin Compartment Separator
Adjustable Coin Compartment