Posiflex CR-2000 Series - Manual (Page 3)

Part 3
5. Signal Cable depend on model
a). For CR-2000: The standard signal cable is 21863018010 which has a 8
pin plug at one end to connect to the cash drawer and a 6 pin plug at the
other end to connect to the POS system/printer. This cable serves for
most popularly used POS equipment such as all Posiflex POS terminals,
all Posiflex POS printers, most Epson POS printers, most Star POS
printers and all other compatibles. The user may cut the 6 pin end and
assemble this free end according to his POS printer specification if the
POS printer used utilizes different connection. The cable connection on
the wires is as below:
Wire color RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
b). For CR-2004: Serial signal cable (RS232 conversion cable
21863259900/21863159900).
c). For CR-2005: USB cable (USB Cable 21863250800/21863150800)
6. Power Source depend on model
a). For CR-2000: not applicable
b). For CR-2004: Power adapter 12VAC 1.5A
c). For CR-2005: Power adapter 12VAC 1.5A
INSTALLATION
Coin compartment adjust:
The coin compartment separator can be removed from and inserted
till click into the grooves in adjustable coin compartment zones for appropriate
compartment size.
Coin Compartment Separator Adjustable Coin Compartment