Posiflex PG-200/1D - Manual (Page 14)

Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for U.P.C. only:
Step 1: Scan Add Suffix.
Step 2: Determine the 2 digit hex value from the Symbology
Chart (included in the Symbology Charts) for U.P.C.
Step 3: Scan 6, 3 from the Programming Chart.
Step 4: Determine the hex value from the ASCII Conversion Chart
for the CR (carriage return).
Step 5: Scan 0, D from the Programming Chart.
Step 6: Scan Save, or scan Discard to exit without saving.
To Clear One or All Prefixes or Suffixes
You can clear a single prefix or suffix, or clear all
prefixes/suffixes for a symbology. If you have been entering
prefixes and suffixes for single symbologies, you can use Clear
One Prefix (Suffix) to delete a specific character from a
symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.
Step 1: Scan the Clear One Prefix or Clear One Suffix symbol.
Step 2: Determine the 2 digit Hex value from the Symbology
Chart (included in the Symbology Charts) for the
symbology from which you want to clear the prefix or
suffix.
Step 3: Scan the 2 digit hex value from the Programming Chart
or scan 9, 9 for all symbologies.
Your change is automatically saved.
14