Posiflex JIVA HS-2310 - Manual (Page 7)

Part 7
TECHNICAL MANEUVERS
Applicable technical maneuvers for this terminal include serial COM port
power supply settings, VGA port power supply setting, system CMOS data
reset, DRAM upgrades. All these technical maneuver operations require
purchase of applicable Technical Manual from Posiflex or consultation from
Posiflex authorized dealers and should be handled only by a qualified
technician.
TILTING LCD PANEL
The tilting mechanism for this terminal utilizes hinges and there
is no particular skill to turn the LCD panel to most suitable angle
at 17° to 45 ° for best view.
CONNECTING CABLES
Please connect all required cables to the appropriate connectors. Please make
sure that each connector is connected to the correct port with the correct
orientation. Damages due to incorrect connection or orientation are not
covered by product warranty!
Some connectors like the COM3 or LAN or CR connector have to be gently
inserted until a click is heard. It is recommended that connectors such as the
COM1/2 and LPT and VGA connector be screwed into place once seated.
Please make sure that each connector has to be connected to the right device in
the right way.
Please follow steps sequentially with reference to pictures below to do cabling
for this model.
Opening Top Cover for Cabling
For cabling extension, essentially opening top cover on the upper I/O plate
then doing connection properly for complete function.
Step A: Release the top cover on the upper I/O plate.