Directed Electronics ESP 540 - Manual (Page 26)

25
© 1999 Directed Electronics, Inc.
Owner Recognition
Owner Recognition is a revolutionary new feature available only
from DEI ® . Using a DEI ® Bitwriter, hand-held programming tool, your
dealer can program many of the system settings. The programmer
makes it possible to program different settings for each transmit-
ter that is used with the system. Then, whenever a specific trans-
mitter is used, the system will recall the settings assigned to that
transmitter. Owner Recognition lets up to four users of the system
have different settings that meet their specific needs. It is almost
like having four separate alarms in your vehicle, one for each user.
NOTE: Owner Recognition cannot be programmed without a Bitwriter and
the necessary software. Check with your dealer for more information.
Rapid Resume Logic
This DEI ® system will store its current state to non-volatile memo-
ry. If power is lost and then reconnected the system will recall the
stored state from memory. This means if the unit is in Valet ® Mode
and the battery is disconnected for any reason, such as servicing
the car, when the battery is reconnected the unit will still be in
Valet ® Mode. This applies to all states of the system including arm,
disarm, and Valet ® Mode.