Directed Electronics ESP 540 - Manual (Page 13)

12
© 1999 Directed Electronics, Inc.
are unable to visually check the vehicle. This feature allows you to
silence and reset the security system when it is triggered, without
having to disarm the system.
High Security Rearm is a feature that protects your vehicle in the
event that the security system is inadvertently disarmed. Two
minutes after disarming the security system with the remote
transmitter, the system will automatically rearm and lock the doors
if a vehicle door has not been opened. Rearming will take place
regardless of whether the system has been programmed for active
locking/arming or passive locking/arming.
If your remote transmitter is lost or damaged, you can manually
disarm your vehicle security system. To disarm the system without
a transmitter, you must have the vehicle's ignition key and know
where the Valet ® switch is located. Be sure to check with your
installer at the time of installation for both the location and the
preset response (1-5 presses) of the Valet ® switch.
To disarm the security system, turn
the ignition key on and press the
Valet ® switch the preset number of
times within 15 seconds. If the
system does not disarm, you may
have waited too long; turn the igni-
tion off and repeat the process.
DRW-35
Disarming Without a Transmitter
High Security Rearm