beautypg.com

Power supply, Cash drawer, Usb 2.0 interface – Pertech 5300 Series User Manual

Page 15

background image

Pertech

220321A

8

Cash Drawer

Warning: use of incompatible cables can damage the printer and will void the warranty.
When purchasing a cash drawer for this product please make sure the vendor is aware of the product specifcations.
When replacing an A470 model printer, the cash drawer cable must be changed.

Pin #

Signal Name

Signal Source

Description

1

Ground

Ground

2

Cash Drawer drive #1

Printer

Drive for Cash Drawer 1

3

Cash Drawer Sense

Cash Drawer

Cash Drawer Switch

4

Cash Drawer +24V

Printer

Drawer supply side.

5

Cash Drawer drive #2

Printer

Drive for Cash Drawer 2

6

COM

Cash Drawer

Cash Sense Return (Gnd)

123456

USB 2.0 Interface

Pin 1

EOT/VCC

Pin 2

D-

Pin 3

D+

Pin 4

GND

Pin 5

GND

Pin 6

GND

The USB cable may be attached or detached when the
system is on. When Using the USB interface the Win-
dows® Operating System will automatically install the
USB port driver. Pertech has available printer drivers at
www.pertechresources.com.

Cash Drawer Y Cable

Printer

Cash Drawers

Cash Drawer Cable

Printer

Cash Drawer

Single Cash Drawer Confguration

Dual Cash Drawer Confguration

(Requires Y Cash Drawer Cable Adapter, See your

cash drawer manufacture for the correct cable.)

1. Printer should be off when connecting the cash drawer.
2. Connect the cable to the cash drawer and the printer.

Warning: When Hot Swapping USB cable make
sure that cable is installed into the correct con-
nectors or damage to the printer could result.

A470 Cash Drawer Commands

ASCII

HEX

Decimal

Default 75ms Pulse

Cash Drawer “A”

ESC BEL

1B 07

27 7

Cash Drawer “B”

ESC BS

1B 08

27 8

ACL Cash Drawer Commands

ASCII

HEX

Decimal

Immediate peripheral pulse

DLE DC4

10 14

16 20

s m n

s: Peripheral Select
m: Peripheral On Time
n: Peripheral Off Time

Immediately generates a pulse of (m x 2 msec) followed by an off time of (n x 2 msec) on the peripheral output. If s
= 00, the frst peripheral on pin 2 is activated and if s =01, the second peripheral on pin 1 is activated.
Off Time should be set so that it is greater than or equal to On Time.

USB Cable Part
Number 106356011

This manual is related to the following products: