Pertech 5300 Series - Manual (Page 12)

Pertech 220321A 5
2.75 Inches
1.75 Document Stop
Right Edge of Form Aligned with Right
Edge of Receipt Retail Endorsement. To
center justify check in print zone, docu-
ment guide is 2.625” from dot column #1
1 Inch
Print feld is 2.5” Wide
Right Justify
Validation Print Fields
The 5300 series printer has 2.5 inch wide printfeld.
The validation print feld height is adjustable from .17 to 1.75
inches. This can be done via the confguration utility or the
one button setup. An inserted form can be manually aligned
or a optional document guide can be attached to provide a
fxed right side stop for the inserted form. The drawings be-
low indicate the typical print positions for a 2 3/4” X 6” form.
The highlighted area is the printfeld width and Maximum
height.
Note: The one button set-up only has three selectable docu-
ment stop settings. Using the Confguration Utility the docu-
ment stop can be adjusted to any desired printfeld height
within the parameters specifed above.See Confguration and
Diagnostics section of this manual for available options. 3 Inches 1 Inch Print Zone
2 Inches for 6” Check
Print feld is 2.5” Wide
Left Justify
3 Inches
3 Inches 1 Inch
Print feld is 2.5” Wide
Right Justify
3.5 Inches
3 Inches 1 Inch
Print feld is 2.5” Wide
Center Justify
3.25 Inches
Bank of F irst Deposit (BOFD) Endorsement A470, bit [print feld is ;larger
Dot column #1 Dot Column #400
Print Zone
2 Inches for 6” Check
Print Zone
2 Inches for 6” Check
3 Inches 1 Inch
Print feld is 2.5” Wide
Right Justify
2.75 Inches
Right Edge of Form Aligned with Right
Edge of Receipt BOFD Endorsement
Effective print area in Endorsement zone
is 1.75” wide.
Print Zone
2 Inches for 6” Check
1.75 Document Stop
1.75 Document Stop
1.75 Document Stop
1.75 Document Stop
Validation and Document Guides
3 Inches 1 Inch Print Zone
2 Inches for 6” Check
Doc ument Guide
2.5” Wide Print Field
Left Justify
Right Justify
To 2” Print Zone:
Note: The Print Field is 2.5” wide. Left Justifcation
will overlap into the 1” right zone. Right Justifca-
tion will overlap into 3” left zone.