Paso Sound WPSS150M - Manual (Page 25)

-24-
UHF handheld transmitter MW295
Parts and functions
1. Microphone capsule module
2. Battery status LED
3. ON/OFF switch
4. LCD
5. Battery compartment
6. Rotating protective cap for controls (also serves as color identification cap)
7. Lock / Unlock
8. Set
9. Up
10. Down
11. Charging port
Battery installation
MW295 microphone requires 2 AA-size batteries to operate. Please insert the batteries
according to the correct polarity. Many batteries are known to have leakage problem of
conductive and corrosive liquid. Please observe the rule to remove the batteries if they are
not to be used for a longer period.
Making changes to various settings in MW295
1.Making changes to Channel:
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page. The cursor will flash
to allow changes to be made. Pressing UP or DOWN button will increase or decrease the
channel number. The corresponding frequency will change accordingly. When a desired
channel is selected, it will be automatically saved and stored in the memory.
2. Making changes to Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH (rechargeable battery) or
AKLN (Alkaline battery) position.
When the desired battery has been selected, it will be automatically saved and stored in
the memory.
Remark : NiMH battery must be selected when rechargeable battery is being used. Never
select AKLN (Alkaline) when transmitter is intended for charging as Alkaline battery can not
be charged ! Wrong selection of battery will result in
battery sensing electronics to display wrong and misleading status information.
1 2 3 4 5 6 7 8 10 11 9