Paso Sound WPSS150M - Manual (Page 13)

-12-
Replacement of the covers of receiver module
To identify different matches of receiver and transmitter, there are 4 extra sets of button
covers with different colors available for replacement.
STEP 1: Adjust the PWR/VOL knob to OFF position. After the
replacement is completed, just put it back accordingly.
STEP 2: Screw off the panel.
STEP 3: Separate the panel and the board as demonstrated.
STEP 4: Use clamps to hold the button and remove the cover.
STEP 5: Repeat STEP 4 to remove the other 2 covers. When
the replacement is complete, please assemble the module
reversely.
REMARK:
This procedure is strongly recommended to be operated by
technician of importer or dealer.