Osoto PH-130W - Manual (Page 22)

1. Press button for five times when visual presenter is
in the state of waiting, continually press buttons fir four
times, and press button into state of infrared decoding. At
this time, users will hear a voice of “Bee”, all indicators will be on
to start operation;
2. Put visual presenter’s remote controller opposite to
receiver window, press button on remote controller, hearing
of a voice of “Bee” shortly, and indicators will be off;
3. Put DVD’s remote controller opposite to visual presenter’s
infrared receiver window, press“MENU”button, will hear of a voice
of “Bee” shortly, indicators will be on
4. After decoding, turn off power, infrared decoding has been
finished sucessfully.
Another example:
the steps of decoding projector’s “Remote Controller” are
as follows:
1.Press button for five times when visual presenter is
in the state of waiting, then press buttons for four times,
and press button into state of infrared decoding. At this
time, users will hear a voice of “Bee”, all indicators will be on to
start operation;
2. Put visual presenter’s remote controller opposite to remote
receiver window, press button on remote controller, will hear
of a voice of “Bee” shortly, and indicators will be off;
3. Put projector’s remote controller oppoiste to visual
- 21 -