Osoto NV-1024 - Manual (Page 16)

2. OSD Controller:
OSD menu operation: PICTURE, RGB, RESOLUTION and SYSTEM. Operate
as shown below:
In the normal state, press FOCUS for 3 seconds to enter into the main menu, and
then press WIDE or TELE button to enter into PICTURE, RGB, RESOLUTION or
SYSTEM setup. After entering into the menu, press WIDE or TELE to select the
option to be set up, and then press Far or Near to set up the detailed specification
under each option.
Pressing “Tele” “Wide” to come to the image setting selection, pressing “Focus” to
come to operation, pressing “Tele” “Wide” to select operation itms needed
,pressing “Far” “Near” to setup the selected items. After entering the image setting
,which could setup the brightness , contrast , saturation and acutance .
- 15 -