Osoto NV-1024 User Manual
Page 11
=
Turn off:
When turn off, press 2 seconds, after heard of a voice of “Bee”, this indicator
will become from red shinning to red, means get into state of waiting, and visual
presenter has been turned off. If visual presenter has central controller function,
when turn visual presenter off, press this button 2 seconds, after a voice of
“Bee”, power indicator shines fastly, meanwhile visual presenter can not be
controlled by any button. When power indicator gets into shining slowly,
press again to turn off projector. After 2 minutes of “Bee”, it is into state of
waiting, at same time projector’s power has been cut down (delayed to turn
off).
When it is into state of turning off,visual presenter will switch "PC IN" (PC’s
signal) into monitor automatically. (It is get through without signal of turning on).
Signal output to monitor
（
preview
）:
Press
this
button
repeatedly
to
select
visual
presenter’s signal, PC signal, and RGB signal’s input. When select
visual presenter’s signal, the indicator will become red
（
other
two
indicators
will
be
off
） ,
when
select
PC
signal
input
,
the
indicator
will
be
on
red
(
other
two
indicators
will
be off
） ,
when
select
RGB
signal
input
,
the
indicator
will
be
red
（
other
two
previewing
indicators
will
be
off
）.
=
Lamp Selection:
=
Preview/shooting:
Press button, users can turn on/off assitant lamps or baselight.
- 10 -