Dolby Laboratories DVD26 - Manual (Page 17)

13
DVD26 DVD AND CD PLAYER USER GUIDE
SETTINGS IN THE SETUP MENU
This chapter explains the necessary basic settings
of the DVD26 player in the setup menu.
Using the Setup Menu
Before playing any discs, we strongly recommend using
the Setup Menu. Here you make all DVD-player setting
required for your benefi t.
• Press the button to switch on.
Also turn on your TV and make sure that it is set to the
correct video input.
– The button switches the player between standby
and on.
– If a disc that’s already loaded starts to play, press
twice to stop it. This will give you access to all set-
tings.
• Press SETUP.
The Setup menu on-screen display (OSD) appears:
Navigate all of the following OSDs using these controls:
Selection Option
Pressing the or
buttons cursor up/down
SELECT select the highlighted menu option
The button go back to the previous issue.
The button go forward to the next issue.
The button switches the player between standby
If a disc that’s already loaded starts to play, press If a disc that’s already loaded starts to play, press If a disc that’s already loaded starts to play, press
Press the button to switch on.
The control possibilities for the current OSD are shown at
the bottom of each screen.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a disc
is playing. Stop the disc, then change the setting. The
current setting for any option is marked with a highlighted
box.
MOVE SETUP : Exit
AUDIO SETUP
AUDIO RELATED
DOWN MIX
DIGITAL OUT
LINEAR PCM OUT
STEREO
ON
DOWN SAMP OFF
VIDEO LAN GEN PROG
MOVE SETUP : Exit
AUDIO SETUP
SET DOWNMIX MODE
DOWN MIX
DIGITAL OUT
LINEAR PCM OUT
LT/RT
STEREO
DOWN SAMP OFF
VIDEO LAN GEN PROG
Audio set up
Here you make all settings required for your audio system.
Downmix
• Set the downmix mode to LT/RT or STEREO.
LT/RT According to Dolby Laboratories standard.
Stereo Pure 2-channel without any concern to Dolby Laborato-
ries standard