Osburn AC02610 - Manual

1. Replace a 6 inch section of stove pipe with the Draw Collar. The
Draw Collar can be installed vertically or horizontally. The Draw
Collar does not change the clearances required by code for single
or double wall stove pipe.
* If using single wall stovepipe, you can either cut a 6-inch
section out or use a “slip section” which will allow adjustment
for the Draw Collar.
* When using double wall pipe, the Draw Collar must be
installed directly on the stove. A stove top adapter or
adjustable section of double wall pipe needs to be installed
directly on top of Draw Collar. If adding the Draw Collar
to an existing double wall system, it may be necessary to
replace a section of pipe with an adjustable section of pipe
that matches the brand of existing double wall pipe.
2. Install the Draw Collar with the crimped end towards the stove
and the cord toward the back of the stove.
3. Connect the high temp cord 4-feet to the included pig-tail cord
3-feet, be sure there is a good connection. Plug into a grounded
three-pronged outlet. If a longer cord is required, be sure it is
rated at 1875 watts, 16 AWG. **The high temp cord is designed
to withstand high temperatures, and can lay on the stove without
problems.
Installation Manual
Draw Collar Wood for Burning Stoves
DRAW
COLLAR
ENGLISH
AC02610
Specifications subject to change without notice
NOTICE: WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
SBI Heating Accessories
250 rue de Copenhague | Saint-Augustin-de-Desmaures
Québec, Canada G3A 2H3
Fax number: 418 878-3001
Email us at [email protected]
®
IMPORTANT SAFETY INSTRUCTIONS
THE DRAW COLLAR IS HOT WHEN ON. DO NOT TOUCH.
BEFORE INSTALLING THE DRAW COLLAR, IT IS
RECOMMENDED THAT YOU HAVE YOUR CHIMNEY CLEANED
AND/OR INSPECTED ACCORDING TO MANUFACTURER
SPECS.
THE FIRST TIME USING THE DRAW COLLAR SOME BURN-
OFF WILL OCCUR WHICH MAY INCLUDE SMOKING AND/OR
SMELL. THIS IS NORMAL AND WILL WEAR OFF.
CONFORMS TO UL STD 499.
CERTIFIED TO CAN/ULC STD S641
& CAN/CSA STD C22.2 NO. 72.
Model #: AC02610
Power 500 W 3.8 amps
THANK YOU AND CONGRATULATIONS...
for purchasing an SBI Heating Accessories, Draw Collar. We have
worked to ensure that the Draw Collar meets high standards for
usability and durability. With proper care, your Draw Collar will
provide many years of service. Please take the time to read this
manual carefully to learn how to correctly operate and maintain
your Draw Collar.
LIMITED WARRANTY
SBI Heating Accessories will repair or replace, at its option,
any Draw collar deemed by it to be defective within one
year of original purchase date. Warranty is limited to non-
commercial users and shall be in force only for the original
purchaser. This warranty does not cover cases of owner
abuse, malicious destruction, or “acts of God” (including
power surges). Proof of purchase will be required, so save
your receipt. A Return Goods Authorization Number needs
to be requested on all returns by email. Product needs to be
returned to our facility, prepaid, at 250 rue de Copenhague,
Saint-Augustin-de-Desmaures, Québec, Canada G3A 2H3.
SBIHA shall not be liable for any consequential or incidental
damages resulting in loss from the use of this product.
In no case will SBIHA’s liability exceed the consumer’s
purchase cost.
AC02610_User guide.indd 1 5/24/2013 5:10:40 PM