Osburn AC02585 - Manual (Page 11)

Splitz-it 5-tON electric lOg Spliter Splitz-it 5-tON electric lOg Spliter
11
ORDERiNg REpAiR pARTS
Parts can be obtained from the store where your mini log
splitter was purchased.
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
SpLiTZ-iT 5-TON ELEcTRic LOg SpLiTTER bREAkDOwN
17
18
9
10
11
12
27
25
26
29
13
8
7
14
15
16
6
5
4
3
1
2
28
20
19
22
23
21
24
30
31
pRObLEM pOSSibLE cAUSE REMEDY/AcTiON
Fails to split logs 1. Log is improperly positioned 1. Refer to Log Splitter Operation Section for log
loading
2. The size or hardness of the log exceeds
the capacity of the machine
2. Reduce the log size before splitting on the log
splitter
3. Wedge cutting edge is blunt 3. Refer to Sharpening Wedge Section to sharpen
the cutting edge
4. Oil leaks 4. Locate leak(s) and contact the dealer
5. Unauthorized adjustment was made onto
the maximum pressure limiting screw
5. Contact the dealer
The log pusher moves with
a jerking motion, makes an
unfamiliar noise or vibrates
excessively
1. Lack of hydraulic oil and excessive air in
the hydraulic system
1. Check oil level for possible oil refilling. Contact
the dealer.
Oil leak occurs around cylinder
ram or from other points
1. Air sealed in hydraulic system while
operating
1. Loosen bleed screw 3-4 rotations before
operating the log splitter
2. Bleed screw is not tightened before
moving the log splitter
2. Tighten the bleed screw before moving the
log splitter
3. Oil drain bolt with dipstick is not tight 3. Tighten the oil drain bolt with dipstick
4. Hydraulic control valve assembly and/
or seal(s) worn
4. Contact the retailer
contact service provider if above remedies fail.
SBIOMWENGSplitzIt.indd 11 1/10/2012 8:14:45 AM