Osburn AC01343 - Manual (Page 3)

3
Other required parts (not included):
WARNING: All parts used must be at least 325°F resistant.
(H)
Angled elbow, depending on your needs*
(I)
5'' semi-rigid tubing, 400°F*
5'' galvanized rigid tube, lengths
depending on your needs*
5'' aluminum insulated tube**
(J)
Recommended universal floor outlet
of 4'' x 10'' x 5''*
(K)
Galvanized floor grill
* Metalized tape is not included but required to seal the joints.
** Clamping ring and metalized tape are not included, but required to seal the joints.
Tools required for installation:
Robertson Screwdriver or ‘Phillips’ Screwdriver 5/16 & 7/16" Wrench