Opticom Elite Series CMS User Manual
Page 33
Central Monitoring System
CMS User’s Manual
33
This function is for intensive (repeat) monitoring two or more preset positions of PTZ. “AUTO
START” and “TOURING START” are available.
AUTO START
It is intensive monitoring against two PTZ preset positions repeatedly in order. Dwell time on
each preset position can be selected.
① START PRESET : Select first preset position.
② END PRESET : Select second preset position.
③ INTERVAL : Select dwell time at each position.
④ AUTO START : It starts automatic monitoring between the PTZ camera’s two preset
positions as per configured.
TOURING START
It is intensive monitoring by repeat touring of selected position of PTZ.
⑤ Save selected position to PRESET No. on the list.
☞
SKIP : This No. will be skipped from TOURING.
☞
1~16 : Save PTZ camera positions to each PRESET No. on the list.
⑥ INTERVAL : Select dwell time at each position.
⑦ TOURING START : It starts touring to all the preset positioned list as per the dwell time.
[NOTE]
To use TOURING function, at least 3 preset positions or more are required.
27. RELAY OUT