Auto usb export – OpenEye OE3 E-Series User Manual
Page 67
29716AG
67
Auto USB Export
Create a mirrored backup of recorded data on a connected USB external hard drive.
OpenEye recommends the use of hard drives only; the use of flash drives is not
recommended for auto backup
.
1.
Press BACKUP on the front panel or remote control and log in.
2.
Select
AUTO USB BACKUP
.
3.
Connect a USB hard drive to the recorder.
4.
Select
SCAN
to locate the drive and then select
TARGET
.
5.
Select the
OVERWRITE
check box if you want to enable the recorder to write over the
oldest data when the drive is full.
6.
Select
CAMERAS
to include in backup.
7.
Select
START
to start backup.
Do not shutdown the system during the backup process.